The Rexon RHP-530 is a Bluetooth-equipped airband handheld radio that easily connects to the Sena 20S (or similar) communication system. This setup allows for a wireless connection between your helmet and the radio, making it the perfect combination for paramotor and paraglider pilots!
To simplify in-flight communications, we also use Sena's wired PTT button . We attach it to the risers, just above the trimmers. This makes it super easy to use: you can press the button with your hands up, while holding the brakes.
Air traffic from airplanes is audible from over 100 kilometers away. In our tests, we observed a range of about 4 kilometers between identical 5W radios. Perfect for communicating between pilots when flying in a group with other ParAddicts !
Choose from a variety of options to create a communication system that fits your needs! You can add a programming kit to your radio or purchase additional 1700mAh or 2400mAh batteries to extend your communication time.
The programming kit allows you to configure the radio from a computer. This is convenient for naming your favorite frequencies and easily adjusting the different options, without going through a complex radio interface. Configure everything simply with a real keyboard!
Main features
-
5W (REP) output power
- 760 COM channels & 200 NAV channels
- 10 weather channels
- 100 memory channels
- Emergency Frequency Reminder 121.5 MHz
- Half-duplex operation
- COM & NAV Band Scanning
- Dual standby function
- One-click selection between active and standby frequency
- Sidetone function
- Backlit LCD display
Frequencies
-
Tx (Communication) : 118.000 to 136.975 MHz
-
Rx (Navigation) : 108.000 to 117.975 MHz
-
Communication : 118.000 to 136.975 MHz
-
Weather : 161.650 to 163.275 MHz
-
Modulation type : AM-FM
-
Antenna impedance : 50 Ohms
-
Pitch : 25 kHz / 8.33 kHz
-
Memory channels : 100
-
Operating temperature : -10°C to +50°C
-
Frequency stability : ±1ppm
Issuer
-
Output power : 5W (PEP)
-
Modulation system : Low level modulation
-
Parasitic emissions : -60dB
-
Current : Approx. 1A (12V)
Receiver
-
Circuit Type : Double Conversion Superheterodyne
-
Intermediate frequency : 1st: 21.7 MHz / 2nd: 450 kHz
-
Sensitivity : 1.0uV for 6dB S/N
-
Selectivity : 6dB: >12 kHz, 70dB < 25 kHz
-
Parasitic emissions : -57dBm
-
AF Output Power : 0.6W @ 8 Ohms
-
Current : 55mA in squelch mode, 400mA at full power
Included with the REXON RHP-530
- Portable transmitter for air band
- Belt clip
- Antenna
- 1700mAh BP-17L Li-Po Battery
- RC-28L Desktop Rapid Charger
- User manual in English
Available options
- Additional battery 1700mAh or 2400mAh
-
Programming kit only
Additional information
-
Warranty : 1 year – Made in Taiwan
-
Shipping : The item is shipped from Taiwan.
-
Duties and Taxes : Orders may be subject to duties, fees or taxes imposed by the destination country or the delivery company. ParAddix is not responsible for these additional charges. For more information, contact your local postal service or customs agency.